1. Specification
Model | MJA MJB MJC |
Usage | Suitable for singeing of cotton,chemical fiber and combination fabric, especially for the singeing of wool fabric ,brand copycat and finished surface .This product can apply to both the new machine design and old machine reform . |
Hand | L.H or R.H |
Rating with | 1400-3600mm |
Working speed | 80-140m/min |
Heat source | gasoline,city gas,natural gas,water gas |
Flame temperature | MJA:800°C-1150°C;MJB:1000°C-1350°C;MJC:over 1150°C-1400°C |
Energy consumption | 8L/h ( gasoline,MJB200-2000mm) |
Flame uniformity | 2000mm amplitude less than 20ºC at the same height |
Singeing grade | 3.5-4 |
dimensions | MJ200 : 2920*210*245(L*W*H) |
Weight | MJ200: about 150kg |
| |
2. Three ways for singeing
3. Picture
4. Installment and adjustment.
1.Do not tear the sealing tape on the air before installment, to prevent dust clogging the gap.
2. Brass pipe of combustion heater should use M12 connector plugged in, and through the combustion air intake pipe, one end of the entrance of the vapor, the other end of the steam trap.
3.After installment,you should turn the burner by hands to check whether it is flexible and convenient.
4.before use the burner ,you can tear the sealing tape,and clean up by 0.5 Mpa compressed air.
5. Package
Crater packed in wooden cases, six-sided box nail moisture felt paper, plus a fixed support plate. After acceptance of quality control personnel can nailing .Inside the box have one certificate,one packing list and one instruction.
6.FAQ
1. What are the main materials of your products?
We are focused on casting and processing of grey iron and ductile iron products.
2. What is your MOQ?
We will arrange production based on your drawings and deliver your products as per your requirements. We will do our best to meet your demands.
3. What is your main equipment?
Our casting equipment is brought from Japan. They mainly include: FBO auto molding lines, sand lines, cleaning lines, vertical and horizontal machining centers and CNC machining center.
4. Do you make the molds by yourself?
We are facilitated with advanced mold making equipment and CNC processing machining center. Therefore, we can make molds independently.
5. What are your advantages?
1) Professional staff
2) 24 years of casting experience
3) Rigorous quality control system
4) On-time delivery rate is over 98%